China dc fuse link Manufacturers Factory Suppliers
-
This GFEV5 Series Semiconductor fuses are uesd for the rated DC/AC voltage of 450V (500V), rated current of 35A-1200A, breaking 50kA, as the comprehensive protection of on-board battery, on-board...
-
This 7E18L Series DC(EV) AC fuses for the pipe bolt connection with fuse part of the scope of protection, has the strong ability of current limiting short-circuit breaking speed, high capacity,...
-
This 1H20L Series DC(EV) fuses are suitable for lines with rated DC voltage below (125V/150V), rated current of 70A-300A and breaking capacity of 20kA.
-
This series of PDU distribution box fuse is suitable for the line with rated DC voltage of 150V (125V) and rated current of 50kA and 70A-1000A, as the comprehensive protection of vehicle battery,...
-
This H14FE DC High Speed Fuse is uesd for rated DC(450V) 500V (40A-60A) line protection. It is a comprehensive protection for instrument power supply, on-board, charger and wiring harness.
-
This GFEV10 Series Semiconductor fuses are suitable for breaking 50kA when the rated DC/AC voltage is up to 1000V and the rated current is 800A.
-
This GFEV7 Series Semiconductor fuses are suitable for breaking 50kA at rated DC /AC voltage up to 750V (700V) and 600A. They are used as the comprehensive protection of on-board battery, new...
-
This GFEV2 series Semiconductor fuses are suitable for the rated DC /ACvoltage 250 V, 300 V) breaking 50 kA, rated current 35 A - 600A line, as the automotive battery, car line system as well as...
-
This 2E18H High Speed Fuses are applicable to lines with rated AC voltage below 250V (240V), rated current of 25A-180A and breaking capacity of AC 100kA They are widely used in charger, power...
-
gPV fuse is applicable to the circuit with rated voltage to DC1500V, rated current of 2a-25a and rated breaking capacity to 20kA. It is mainly used in the combiner box of solar photovoltaic system...
-
This series of Auto Fuse Tubes are applicable to rated DC voltage (125V / 150V), AC 300V, rated current 50A-400A and high sectioning capacity (50kA AC) (20kadc). It is widely used in semiconductor...
DC fuses To protect the DC wiring from overloading, fuses need to be used as overloaded cables or wires can cause fire and hazardous situations. Overloaded wiring can be caused by faulty...
The NH DC fuse -links engineered by ETI, is an NH fuse intended for photo voltaic applications. This device features a gPV class that complies to RoHS and IEC 60269-6 ed. 1.0 standards. ......
DC Fuse Solar dc fuses is primarily used to protect the system wiring from getting too hot and catching fire. Secondly, it’s also used to protect devices from catching fire or from becoming...
Nov 17, 2017 · As a general rule, a fusible link is made of wire that is four gauges higher (smaller) than the rest of the circuit, making it the weakest link in your electrical chain. For example, a...
DC FUSE A range of 10x38mm fuse links specifically designed for protecting photovoltaic strings. These fuse links are capable of interrupting low overcurrents associated with faulted...
Jan 16, 2021 · On my 2009 Gen2 Prius, removal of the 100Amp DC/DC fusible link was a very simple and straightforward job. Be sure to disconnect the HV battery and the auxilliary battery...












